Product Introduction
Product Parameters
Model |
CM-PV840 |
Movement parameters |
|
Imaging devices |
1/2.5" CMOS 8.51MP |
Footage |
Optical zoom 20X, FHD up to 40X zoom with magnification mode on (no loss of image quality). With the SRZ function also turned on, the 30x zoom is possible in 4K and up to 80x zoom in FHD. |
|
4.4mm(Wide)-88.4mm(Tele) |
Digital Doubling |
12X |
Field of view |
70.2 (W) - 4 .1˚ (T) |
Aperture |
F2.0 (W) - F3.8 (T) |
Minimum Illumination |
0.4 lux (1/30second,50 high sensitivity mode on),1.6lux (1/30second,50 high sensitivity mode off), 0.06 lux (1/4second,50 high sensitivity mode on),0.21lux (1/4second,50 high sensitivity mode off), |
Shutter speed |
1/1 - 100000s ( Level 22) |
Spotlight |
Auto Focus(Trigger/Interval), Manual Focus(Variable Speed), One Push Trigger, Near Limit |
White balance |
AUTO, ATW, Indoor, Outdoor, One Push WB, Manual WB, Outdoor Auto, Sodium Vapor Lamp(Fix/Auto/Outdoor Auto) |
Exposure |
Full Auto, Gain, Gain Limit, Shutter Priority, Iris Priority, Manual, Bright,Slow Shutter, Max/Min Shutter Limit, Slow AE |
Features |
Fogging, backlight compensation, glare suppression, image flip, mirroring |
ND Filter |
- |
Wide Dynamic |
Support |
Noise reduction |
On/Off (1 -5 / Off, 6 levels), 2D/3D |
Signal-to-noise ratio (S/N) |
50dB |
System synchronisation |
Internal synchronisation |
Image stabilisation Electromechanical parameters |
Support |
Horizontal angle |
Horizontal: ±175° (adaptive range of zoom and rotation speed: 0.05~100°/S) |
Vertical angle |
Vertical: +90°~-30° (Variable and rotational speed adaptive range: 0.05~50°/S) |
Preset position |
128 (recall speed: 150°/S, remote control supports 9 preset positions) |
Preset bit speed |
Rotation speed adjustable: 0-5 levels |
Preset bit memory |
Preset bits to store camera parameters and PTZ position parameters |
Power-up action |
Support |
Protection class |
Interior |
Interface parameters |
|
Video output |
1xRJ45-IP/HDBaseT (4K), HDBaseT video output up to 80-100m 1xHDMI Type A- HDMI1.4(4K), 1xBNC-3G-SDI(1080P), 1xCVBS |
Video format (HDMI) |
4K 2160p:29.97/25/23.98; 1080p:59.94/50/29.97/25; 1080i:59.94/50; 720p:59.94/50/23.98 (23.98 supported via FW upgrade) |
HDMI colour space |
YCbCr, 4:2:2 RGB, 4:4:4 |
IP Video Streaming |
Up to 4K / 30 and 1080p60 |
Camera control interface |
RS232/RS-422/RS485 (RJ45x2 including RJ45 to Phoenix terminal control cable), IP control (RJ45), HDBaseT (RJ45), IR remote control |
Control protocols |
VISCA, VISCA Over IP, Pelco D/P, IP Onvif, IP Client |
Network |
RJ45x1 (100Mb, shared with HDBaseT), 4k IP video streaming, system upgrade, POE (IEEE802.3at) |
Synchronisation |
Internal synchronisation |
Audio In / Out |
Audio in x1, Audio out x1, 3.5mm audio jack (IP mode) |
Audio output |
SDI embedded audio output, 24-bit stereo |
Local Storage |
Not activated |
Tally Lamp |
Support |
Dipswitch |
Rear panel: 8 PIN x 1; video resolution Dip X1 |
System firmware upgrade |
Upgrade of camera systems and AI functions via USB 2.0 (FW upgrade only) and IP |
Power connector types |
IEC60130-10 (JEITA standard RC-5320A) TYPE4 |
SDI parameters |
|
SDI Standards |
SD-SDI, HD-SDI, 3G-SDI support |
Video formats (SDI) |
1080p:59.94/50/29.97/25/23.98; 1080i:59.94/50; 720p:59.94/50 |
Standard |
SMPTE 292 (1.5Gb/s), SMPTE 425-A (3Gb/s), SMPTE352 SDI metadata support |
Network |
|
Video compression |
MJPEG, H.264/H.265 |
IP Video Formats |
True dual output: IP/SDI video formats can be set individually, 3840x2160p30/25, 1920x1080p60/50/30/25, 1280x720p60/50/30/25 |
Agreement |
TCP/IP, ICMP, ARP, RTP, SIP, UDP, HTTP, DNS, DHCP, FTP, NTP, RTMP, RTSP |
Code Stream |
3-stream capability will meet various bandwidth, frame rate and storage requirements in real time |
Audio compression |
AAC-LC wideband audio encoding (supports duplex communication, audio/video synchronisation) |
OSD |
Custom OSD with custom logo insertion support |
Compatible Integration |
ONVIF2.4, VISCA Over IP |
General parameters |
|
Operating temperature |
-10 ~ +50(0C) |
Working humidity |
≤80 |
Input power |
DC 12V, PoE+ (IEEE 802.3at), POH (HDBAaseT powered) |
Power |
15.8W |
Size |
160x178x220mm |
Weight HDBaseT receivers |
2.0Kg |
Input |
1 x RJ45-HDBaseT |
Output |
1x HDMI (Type A - HDMI 1.4b), 1 x RJ45-IP Direct (100Mbps, extended connection only, not IP encoder) |
Power input |
DC54V, 2.77A |
Power output |
POH (Power Over HDBaseT) powering the camera via CAT6 cable |
Control interface |
2 x RJ45-RS232/RJ45-RS422/RS485, IR remote control |
Infrared control interface input |
3.5mm 3.5-5v TTL |
Audio output |
3.5mm jack |
Size |
164x118x33mm |
Weight |
0.52KG |