Product Introduction
It supports dual channel behavior analysis: Area intrusion detection, cross boundary detection, entry area detection and exit area detection.
Support abnormal temperature detection.
Support linkage sound alarm.
Support linkage white light flashing alarm.
Thermal imaging function:
Uncooled detector, resolution 160 × 120 (default 320) × 240 output).
Support agc4.0, DDE, 3dnr.
Support white hot, black hot, iron red and other 15 kinds of false color mode.
Visible light function
4 million star level 1 / 2.7 inch high performance CMOS; The highest resolution is 2688 × 1520@25fps .
Visible light supports low bit rate, low delay, ROI ROI ROI enhanced coding.
Support 3D digital noise reduction, support 120dB wide dynamic.
Infrared correlation
Support up to 15m infrared supplementary light.
Support smart IR, support anti fill light over exposure on and off, open support. Automatic and manual, manual support according to the distance level control fill light brightness.
Support day and night two sets of parameter independent configuration.
System function:
Support dual channel single IP output.
It supports dual stream, mobile phone alarm receiving / viewing, and fluorite cloud platform access.
Support Poe power supply
Support IP66 grade waterproof and dustproof, high reliability.
Working environment: - 40 ℃ ~ 70 ℃, < 95% RH.
Interface function:
Support 10m / 100M adaptive network port.
Support micro SD / micro SDHC / micro SDXC card (128G / 256g) local storage.
1 alarm input / output.
1 channel audio input / output.
One DC 12V power input.
Safety related:
Support the security authentication such as HTTPS, support the creation of certificate.
Support three levels of user rights management, support IP address filtering, support authorized users and passwords.
Product Parameters
Model Parameters |
DS-2TD1217-2/3/6/QA |
|||
Thermal Imaging Dome Network Camera |
||||
Thermal Imaging |
Sensor Type |
Vanadium oxide uncooled detector |
||
Maximum image size |
160× 120 (default output 320×240) |
|||
Image size |
17μm |
|||
Response band |
8~14μm |
|||
NETD (Noise Equivalent Temperature Difference) |
≤ 40mk(@25°C,F#=1.0) |
|||
Thermal imaging lens focal length |
2mm |
3mm |
6mm |
|
MRAD (spatial resolution) |
9.44 |
5.48 |
2.74 |
|
Thermal imaging field of view |
90°×66.4° |
50°×37.2° |
25°×18.7 |
|
Thermal Imaging Close-Up Distance |
0.15m |
0.3m |
1.1m |
|
F-value |
1.1 |
|||
False color mode |
White heat, black heat, fusion 1, rainbow, fusion 2, iron red 1, iron red 2, sepia, color 1, color 2, ice and fire, rain, red heat, green heat, dark blue and other 15 |
|||
Visible light |
Sensor Type |
4M Starlight-grade 1/2.7" Progressive Scan CMOS |
||
Resolution |
2688×1520@25fps |
|||
Minimum Illumination |
0.0018Lux @(F1.6,AGC ON) ,0 Lux with IR |
|||
Shutter |
1/3 sec. to 1/100,000 sec. |
|||
Visible lens focal length |
2mm |
4mm |
8mm |
|
Visible field of view |
119.3°×93.3° |
84.0°×44.8° |
39.4°×22.1° |
|
Day and night conversion mode |
ICR infrared filter type |
|||
Wide dynamic range |
120dB |
|||
Infrared irradiation distance |
Up to 15 meters |
|||
Image Functions |
Dual light fusion |
Not supported |
||
Painting within a painting |
Not supported |
|||
Intelligent Information Overlay |
Support for superimposing thermal imaging information in visible channel images (only temperature measurement rules, temperature measurement values are supported) |
|||
Smart Features |
Behavior Analysis |
Thermal imaging channels (default): border crossing detection, area intrusion detection, entry/exit area detection Visible light channel: border crossing detection, area intrusion detection, entry/exit area detection |
||
Pyrotechnic detection |
Not supported |
|||
Smoking Detection |
Not supported |
|||
Linkage alarm |
Support linkage white light alarm, support linkage sound alarm |
|||
Temperature measurement function |
Temperature abnormal function |
Full screen temperature measurement Expert mode: 10 points, 10 boxes, 1 line total 21 temperature measurement rules |
||
Temperature measurement range |
Temperature measurement range: -20℃~150℃ |
|||
Temperature measurement accuracy |
Temperature measurement accuracy: ±8℃ or ±8% of the reading (take the maximum value) |
|||
Compression standard |
Video compression standards |
H.265/H.264/MJPEG |
||
H265 encoding type. |
Main Profile |
|||
H264 encoding type. |
BaseLine Profile / Main Profile / High Profile |
|||
Video compression bitrate. |
32 Kbps~8Mbps |
|||
Audio compression standards |
g.711/g.722.1/g.726/mp2l2/pcm |
|||
Audio compression bit rate. |
64Kbps(G.711) / 16Kbps(G.722.1) / 16Kbps(G.726) / 32-192Kbps(MP2L2) |
|||
Storage function |
SD card storage. |
Support Micro SD / Micro SDHC / Micro SDXC card ((128GB or 256GB) disconnected local storage and disconnected transfer |
||
NVR storage. |
Support (96/86/77/76) I series NVR access, support preview/playback, rule display (behavior analysis, temperature measurement), alarm event upload (behavior analysis, temperature measurement), remote configuration |
|||
Network Functions |
Main code stream.
|
Visible light: 50Hz 25fps (2688*1520),,25fps (1920 × 1080), 25fps (1280 × 720) Visible light: 60Hz: 30fps (2688*1520), 30fps (1920 × 1080), 30fps (1280 × 720) Thermal imaging: 25fps (160 × 120 (output 320 × 240) |
||
Subcode streams.
|
Visible light: 50Hz: 25fps (704 × 576), 25fps (352 × 288) Visible light: 60Hz: 30fps (704 × 480), 30fps (352 × 288) Thermal imaging: 25fps (160 × 120 (output 320 × 240)) |
|||
Network Protocols |
IPv4/IPv6,HTTP,HTTPS,802.1x,Qos,FTP,SMTP,UPnP,SNMP,DNS,DDNS,NTP,RTSP,RTCP,RTP,TCP,UDP,IGMP,ICMP,DHCP,PPPoE,Bonjour |
|||
Interface protocol. |
ONVIF(PROFILE S,PROFILE G),ISAPI,SDK,Ehome,GB28181 |
|||
Maximum number of preview channels |
Route 20 |
|||
User Management |
Support three levels of user rights management, administrator, operator and normal user |
|||
Security Policy |
Supports authorized users and passwords, HTTPS encryption and IEEE 802.1x network access control, IP address filtering |
|||
Interface |
Alarm input |
Support 1 channel DC 0~5V alarm input |
||
Alarm output |
Support 1 way normally open relay output, alarm type can be set |
|||
Audio Input |
1 x 3.5mm Mic in/Line in interface. Line input: 2-2.4V[p-p] |
|||
Audio Output |
1-way Impedance: 600Ω |
|||
Reset button |
1 reset button |
|||
Network port |
1 RJ45 interface 10/100M adaptive Ethernet port |
|||
RS485 interface |
1 way |
|||
SD card storage |
1 internal SD card slot |
|||
Client |
iVMS-4200/Fluorite/HIK-CONNCET |
|||
Browser |
Support IE7+, Chrome18+, Firefox5.0+, Safari5.02+ browsers, multi-language support |
|||
System Parameters |
Power input |
DC 12 V (±20%) or PoE (802.3af, class 3). Note: Package comes standard with DC 12V power adapter |
||
Power |
DC 12 V (±20%): 0.7 A, max. 8W PoE (802.3af, class 3): 42.5 V to 57 V, 0.14 A to 0.22 A, max. 8.5W |
|||
Operating temperature and humidity |
-40℃~70℃, <95% RH |
|||
Protection level |
IP66 |
|||
Weight |
1.0kg |