Product Introduction
Product Parameters
Model |
KC-Y40MD |
|
Basic parameters |
Image sensors |
1/1.8" progressive scan CMOS |
Minimum Illumination |
Colour: 0.005Lux @ (F1.6, AGC ON); B&W: 0.001Lux @ (F1.6, AGC ON) |
|
Resolution and frame rate |
Main stream 50Hz:25fps(3840*2160,1920×1080,1280×960,1280×720) , 50fps (1920×1080,1280×960,1280×720); 60Hz:30fps(3840*2160,1920×1080,1280×960,1280×720) , 60fps (1920×1080,1280×960,1280×720) Sub-stream 50Hz:25fps(704×576,640×480,352×288);60Hz:30fps(704×480,640×480,352×240) Third stream: 50Hz:25fps(1920×1080,1280×960,1280×720,704×576,640×480,352×288); 60Hz:30fps(1920×1080,1280×960,1280×720,704×480,640×480,352×240) |
|
Video compression |
H.265/H.264/MJPEG |
|
Audio compression |
g.711alaw/g.711ulaw/g.722.1/g.726/mp2l2/aac/pcm |
|
White balance |
Auto White Balance 1 / Auto White Balance 2 / Manual / Daylight / |
|
Gain control |
Automatic/Manual |
|
Signal-to-noise ratio |
Greater than 52dB |
|
3D digital noise reduction |
Support |
|
Backlight compensation |
Support |
|
Area Exposure / Focus |
Support |
|
Electronic shutter |
1/25 to 1/30,000s |
|
Day and night mode |
Automatic ICR colour to black |
|
Privacy masking |
Up to 24 polygonal areas; multiple colour options supported |
|
Spotlight mode |
Automatic / semi-automatic / manual |
|
Footage |
Focal length |
6.7-134.5mm, 20x optical |
Variable speed |
Approx. 3.3 seconds (optical, wide angle - telescopic) |
|
Horizontal view |
58.5-3.7 degrees (wide angle - telescopic) |
|
Close up distance |
10 to 1500mm (wide angle - telescopic) |
|
Number of apertures |
F1.6-4.1 |
|
Function |
Smart Detection |
Face detection, area intrusion detection, boundary crossing detection, area entry detection, area exit detection, wandering detection, people gathering detection, item left behind detection, item pickup detection, audio anomaly detection, motion detection |
Image enhancement |
120dB ultra-wide dynamic, fog transmission, glare suppression, electronic stabilisation |
|
Smart Coding |
smart265, smart264, low bitrate, ROI, SVC |
|
Equipment anomaly detection |
Broken network cable, IP address conflict, full memory, wrong memory, illegal access |
|
Network |
Network protocols |
IPv4/IPv6,HTTP,HTTPS,802.1x,Qos,FTP,SMTP,UPnP,SNMP,DNS,DDNS,NTP,RTSP,RTCP,RTP,TCP/IP,DHCP,PPPoE,Bonjour |
Application Programming Interface |
Open API for software integration, support for standard protocols (ONVIF, ISAPI), support for Hikvision SDK and third party management platform access, support for E home protocol |
|
Browser |
Support IE8+, Chrome31-44, Firefox30-51, Safari8.0+ browsers |
|
Number of simultaneous video previews |
Up to 20 ways |
|
User rights |
Up to 32 users at 3 levels: administrator, operator and normal user |
|
Safe Mode |
Authorised username and password, and MAC address binding; HTTPS encryption; IEEE 802.1x network access control, IP address filtering |
|
Interface |
Power supply |
DC12V±25%, 1.5A |
Network Interface |
Adaptive 10M/100M network data |
|
Local video output |
Supports HDMI and 3G-SDI video output interfaces HDMI: 2160P@50fps/60fps,2160P@25fps/30fps,1080P@25fps/30fps,720P@50fps/60fps,1080I@50fps/60fps,1080P@50fps/60fps SDI: 1080P@25fps/30fps,720P@50fps/60fps,1080I@50fps/60fps,1080P@50fps/60fps |
|
RS485 control interface |
Half-duplex mode with adaptive HIKVISION, PELCO-P and PELCO-D protocols |
|
Audio input |
1 audio input |
|
General specifications |
Power consumption |
Max. 12W |