Product Introduction
CM8220L l 1/2.86” CMOS image sensor progressive scan
l Wide dynamic function
l Video signal output
l Aperture value F1.6 20x optical zoom lens (20X optical zoom +12X digital zoom = 240x)
l Day and night switch
ICR infrared filter switch
l Privacy masking
l Support remote control communication protocol
SONY-VISCA, PELCO-D, etc.
l Advanced functions
3D-DNR (Electronic Noise Reduction)
BLC (backlight compensation)
Motion Detection
DSS (frame accumulation)
Image flip
HLC (strong light suppression)
Product Parameters
model |
CM8220L |
|
image sensor |
image sensor |
1/2.86” Progressive CMOS |
scanning system |
16:9 Progressive |
|
synchronous system |
Internal synchronization |
|
Effective pixel |
1920(H) x 1080(V) |
|
Minimum illumination |
0.2Lux (day), 0.1Lux (night), 0.005lux (DSS on) |
|
Horizontal resolution |
1000TVL |
|
Optical parameters |
camera lens |
20x optical zoom, 4.7 ~ 94mm, f1.6 ~ f3.5 |
Doubling |
20x optical zoom + 12x digital zoom = 240x |
|
focusing |
Near / far focus, auto / manual / one button |
|
visual angle |
57.4 °(WIDE), 3.2°(TELE) |
|
function |
Backlight |
WDR (wide dynamic) / BLC (backlight compensation), HLC (strong light suppression) |
exposure |
Auto / manual |
|
white balance |
Automatic (3000°K ~8,000°K) / auto tracking white balance (1900)°K~11,000°K) / manual |
|
Day night switching system |
AGC / ICR |
|
Electronic shutter |
NTSC: 1 / 30 ~ 1 / 30000, pal: 1 / 25 ~ 1 / 30000, DSS frame accumulation (~ 1 / 1sec) |
|
function |
Privacy masking, mirror function, 3dnr, anti flicker, digital zoom, sharpness, temperature display |
|
Video output |
SDI output |
SMPTE 292M(1.485Gbps):1080i@50,60 1080p@25,30 720P@50,60 SMPTE 424M(2.97Gbps):1080p@50,60 |
800mVp-p, 75Ω, unbalanced generator(single-ended) |
||
CVBS (NTSC/ PAL) |
Analog composite signal (1V)± 0.2 Vp-p) NTSC/PAL |
|
HDMI output |
HDMI 1920x1080p@50,60 1920x1080i@50,60 1920x1080p@25,30 1280x720p@50,60 |
|
control interface |
RS485 |
PELCO-D / sony-visca protocol |
8bits data, 1 stop bit, no parity, 2400~115200bps |
||
control |
Day and night switching input, dynamic detection output |
|
General parameter L |
working temperature |
-10℃ ~ 50℃ |
Power Supply |
12VDC (7V to 15VDC) |
|
power waste |
MAX 5W (3.2W Lens inactive, 3.9W Lens active) |
|
size |
89(D) x 50(W) X 60(H) mm |