Product Introduction
Product Parameters
FCB-CX1010P |
FCB-EX1010P |
Imaging device |
1/4Inch view had CCD |
Effective pixel |
About 440000 pixels |
Horizontal resolution |
On / off (on: 530 TV line) |
camera lens |
36Optical zoom, f = 3.4mm (wide end) ~ 122.4mm (far end), f1.6-f4.5 |
Digital zoom |
12X (432x, using optical zoom) |
Viewing angle (horizontal) |
57.8°(Wide end) - 1.7°((far end) |
Minimum working distance |
320mm (wide end), 1500mm (far end) |
Support synchronization system* |
Internal / external (V lock) |
Minimum illumination |
1/60Second mode: 1.4lx (typical) (f1.6, 50ire) Quarter second mode: 0.1lx (typical) (f1.6, 50ire) |
Signal to noise ratio |
>50dB (weighted on) |
Support electronic shutter* |
1/1- 1/10.00022 seconds |
Support white balance* |
Automatic white balance, automatic tracking white balance, indoor, outdoor, one button, manual |
Support gain* |
Auto / manual (· 3-28db, 2dB step) |
Support AE control* |
Automatic, manual, priority mode (shutter priority & aperture priority), brightness, ev compensation, backlight compensation, slow AE |
Support wide dynamic range* |
On / off |
Backlight compensation* |
On / off |
Support privacy zone masking* |
On / off (each screen's masking area / when combined with pan tilt and lens zooming, the entire monitoring area can be preset with 24 masking areas, 8 blocks per screen, supporting 14 kinds of colors and mosaics) |
Support character generator* |
Mode display / multi line OSD (OSD display takes precedence over mode display) |
Support flicker elimination* |
· |
Support focus system* |
Automatic (sensitivity: normal, low).One click auto focus, manual, infinity, alternate AF, alternate auto focus, zoom trigger AF |
Support image effects* |
Electronic flip, negative effect, black & white, mirror image |
Zoom switch |
Far end |
Support video output* |
VBS: 1.0vp-p (negative synchronization). Y / C |
Camera module control interface* |
Visca (TTL signal level), baud rate: 9.6kbps, 19.2kbps, 38.4kbps, 1 or 2 stop bits optional |
Storage temperature |
-20-60℃ |
working temperature |
0-50℃ |
Power requirements |
6-12V DC |
Power consumption |
2.6W (motor not activated), 4.9w (motor activated) |
weight |
230g |
Size (width)×high×(deep) |
50.0 x 57.5 x 87.9mm |