Product Introduction
Product Parameters
model |
FCB-EX490EP |
||
image sensor |
1 / 4 inch view had CCD |
||
signalling system |
NTSC |
PAL |
|
Effective pixel |
380000 pixels |
440,000pixel |
|
Horizontal resolution |
Turn on high resolution mode: 530 TV line (detaulf) Turn on high resolution mode: 470 TV line (NTSC) / 460 TV line (PAL) |
||
camera lens |
15Double optical zoom F = 4.1 mm (wide end) to 73.8 mm (distal end), f1.4 to f3.0 |
||
The number is doubled |
12x (216x optical zoom) |
||
Viewing angle (horizontal) |
48.0°(Wide end) to 2.5°((far end) |
||
TV distortion |
- |
||
Minimum object distance |
290Mm (wide end) to 800mm (far end) |
||
synchronous system |
Internal / external (V-LOCK) |
||
Minimum illumination |
1 / 60s mode: 0.7lx (typical) (f1.4,50 IRE) 1 / 4S mode: 0.07lx (typical) (f1.4,50 IRE) |
||
Automatic ICR |
yes |
||
Image stabilizer |
nothing |
||
Video move delete |
yes |
||
Multi line OSD |
Yes (up to 11 lines, 20 channels per line) |
||
Slow acoustic emission response |
yes |
||
E-hp |
yes |
||
Image detection |
yes |
||
Slow shutter |
yes |
||
Video output |
VBS: 1.0vp-p (negative synchronization), Y / C |
||
Camera assembly control interface |
Visca (TTL signal level), baud rate: 9.6kb/s, 19.2kb/s, 38.4kb/s, stop bit: 1 or 2 bits |
||
Signal to noise ratio |
Above 50 dB |
||
shutter speed |
1/1To 1 / 10000 seconds, a total of 22 steps |
||
white balance |
Automatic, automatic tracking, white balance, indoor, outdoor, one button, manual |
||
gain
|
Auto / manual (- 3dB to 28dB, 2dB steps)
|
||
Automatic exposure control |
Auto, manual, priority mode (shutter priority and aperture priority), brightness, ev compensation, backlight compensation, slow AE |
||
Wide dynamic range |
On / off |
||
Backlight compensation |
On / off |
||
Privacy zone masking |
On / off (each screen's masking area / when combined with pan tilt and lens zooming, the entire monitoring area can be preset with 24 masking areas, 8 blocks per screen, supporting 14 kinds of colors and mosaics) |
||
Character generator |
Mode display / multi line OSD (OSD display takes precedence over mode display) |
||
Flicker elimination |
(automatic) |
- |
|
Focusing system |
Auto (sensitivity: normal, low), one touch AF, manual, infinity, interval AF, zoom trigger AF |
||
Support image effects |
Electronic flip, negative effect, black & white, mirror image |
||
Zoom switch |
Far end |
||
Storage temperature |
-4To 140°F (- 20 ℃ to 60 ℃) |
||
working temperature |
32To 122°F (0 ℃ to 50 ℃) |
||
Power requirements |
6.0V to 12.0V DC |
||
power waste |
2.6W (motor not started), 4.4w (motor start) |
||
weight |
230g |
||
size |
52.0x 57.5 x 88.5mm |