Product Introduction
Product Parameters
Product model |
FCB-CX48EP/FCB-EX48EP |
signalling system |
PAL |
image sensor |
1/4INCH CCD (interlaced scan) |
Effective pixels |
440,000Pixel 18x optics |
camera lens |
F = 4.1 mm (wide end) to 73.8 mm (distal end) f = 1.4 to 3.0 |
The number is doubled |
12X |
Viewing angle (horizontal) |
48.0°(Wide end) to 2.8°((far end) |
Minimum object distance |
10mm (wide end) to 800mm (far end) (default: 290mm) |
Signal to noise ratio |
Above 50dB |
Video output |
Analog VBS: 1.0vp-p (negative synchronization), Y / C Digital Y / CB / Cr 4:2:2 (ITU-R bt656 compliant) |
Camera assembly control interface |
Visca (CMOS 5V), baud rate: 9.6kbps, 19.2kbps, 38.4kbps, Stop bit: 1 bit |
shutter speed |
1/1To 1 / 10000 seconds, a total of 22 steps |
white balance |
Automatic, automatic tracking, white balance, indoor, outdoor, outdoor automatic, sodium vapor lamp (fixed / automatic), one button, manual |
Automatic exposure control |
Auto, manual, priority mode (shutter priority and aperture priority), brightness, ev compensation, slow AE |
Focusing system |
Automatic (sensitivity: normal, low), one button AF, manual, infinity, interval AF, AF is triggered by zoom, and focus compensation is made when ICR mode is on |
EV compensation |
yes |
Backlight compensation |
yes |
RIS Mode |
16Step |
Preset position |
6Location |
Digital output |
yes |
Enhanced noise reduction |
yes |
Global privacy zone masking |
yes |
Dynamic frame measurement |
yes |
Alarm function |
yes |
Slow AE response |
Yes (more than 10 minutes) |
Special effects |
Yes (electronic flip, negative, black and white, mirror, color enhancement) |
The picture is still |
yes |
Slow shutter |
yes |
Temperature reading |
yes |
Title Display |
Yes (20 characters per line, up to 11 lines) |
Camera module mode display |
Yes (English * / Chinese) * default |
Key switch control |
yes |
Multiline OSD |
yes |
Storage temperature |
-20℃to + 60℃ |
Storage humidity |
20% to 95% |
working temperature |
-5℃to + 60℃ |
Operating humidity |
20% to 80% |
Power requirements |
6.0V to 12.0V DC |
power waste |
2.0W (motor start: 3.1w) |
weight |
230g |
size |
50.0X57.5X88.5 |