Product Introduction
HM-TD2A67H1-25_Q
Built in high sensitivity detector, supporting 640 × 512 resolution
Thermal imaging electric lens 25mm, minimum imaging distance 0.5m, supporting automatic focusing
Support multiple temperature measurement functions: point, line, and box temperature measurement, highlighting the highest temperature through a cross cursor
Supports two temperature measurement ranges: 0 ℃ -800 ℃ or 600 ℃ -1800 ℃
Temperature measurement accuracy: ± 2 ℃ or ± 2% of reading
Supports image detail enhancement functions such as 3D noise reduction and manual AGC
Supports multiple fake colors
Small size, easy to integrate, and anti loosening of all interfaces
Product Parameters
|
Thermal imaging |
|
|
Sensor type |
Vanadium oxide non cooled detector |
|
resolving power |
six hundred andforty × five hundred and twelve |
|
Frame rate |
50 Hz: 50 fps |
|
pixel size |
seventeen μ M |
|
Response band |
8-14 μ M |
|
NETD (Noise Equivalent Temperature Difference) |
<40 mk (@ 30 ° C, F #=1.0) |
|
Maximum image size |
six hundred andforty × five hundred and twelve |
|
Thermal imaging lens focal length |
25 mm |
|
Max Aperture Value |
F1.5 |
|
MRAD (Spatial Resolution) |
zero point six eight |
|
Thermal imaging close range |
0.5 m |
|
The farthest distance for temperature measurement (0.1 × 0.1m) |
25m |
|
Field of view angle |
24.9 ° × 19.9 ° |
|
palette |
15 options including White Heat, Black Heat, Fusion 1, Rainbow, Fusion 2, Iron Red 1, Iron Red 2, Dark Brown,Color 1, Color 2, Ice Fire, Rain,Red Heat, Green Heat, Deep Blue, etc |
|
Temperature measurement accuracy |
± 2 ℃ or ± 2% of reading |
|
Measuring range |
0 ℃ -800 ℃ or 600 ℃ -1800 ℃ |
|
image processing |
|
|
Intelligent information overlay |
10 points for temperature measurement, 10 boxes for temperature measurement, and1 line for temperature measurement |
|
Video and audio |
|
|
Maximum preview paths |
Route 20 |
|
Video compression standards |
H. 265/H.264/MJPEG |
|
interface |
|
|
Reset key |
1 unit |
|
client |
IVMS-4200/iVMS-4800 |
|
Alarm input |
Supports 1 DC 0-3.3 V alarm input |
|
Alarm output |
Supports 1 normally open switch output |
|
RS485 control interface |
1-way, supporting HIKVISION/PELCO-D/PELCO-P/MODBUS protocol |
|
Ethernet port |
1 RJ45 interface 10 M/100 M/1000 M adaptive Ethernet port |
|
Network Protocol |
IPv4, IPv6, HTTP, HTTPS, 802.1x, Qos, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMP, ICMP, DHCP |
|
Application Programming Interface |
SupportsISAPI,SDK 16/32bit 640 × 512 pixeltemperature data output, open network video interface standard protocol |
|
Analog video output |
1 channel SMA interface, output CVBS video |
|
system parameter |
|
|
Menu Language |
Chinese |
|
Storage temperature and humidity |
-40 ℃~70 ℃,<90% RH |
|
Shell material |
aluminium alloy |
|
install |
M3 threaded port |
|
size |
one hundred × fifty × 50 mm (length, width, height) |
|
Power input |
DC 10~30 V Remarks: The packaging comes standard with aDC 12 V power adapter |
|
power |
6 W |
|
Working temperature and humidity |
0 ℃~50 ℃,<90% RH |
|
Protection level |
IP40 |
|
weight |
Approximately 441 g |
+8613798538021